What is the safe operation procedure of Guoxing Technology Smartplasma plasma cleaning machine? Guoxing Technology Smartplasma plasma cleaning machine works in a vacuum state, which can achieve very good cleaning results, and there is no waste liquid after cleaning, and it can also handle oxides, metals and polymer materials well. It should be more and more The more extensive it is, safety must be paid attention to during the use of plasma cleaners. Today, Guoxing Technology Smartplasma introduces in detail what the safe operating procedures of plasma cleaners are. 1. The plasma cleaner should be placed in a dry, clean and non-corrosive environment for use, and can not generate violent vibration; leave enough space for heat dissipation on the reverse side of the equipment to prevent the temperature from being too high and damaging the equipment . 2. Ensure that the plasma cleaner is well grounded to avoid personal safety accidents. 3. During working hours, do not allow the plasma cleaner to work with no load or start it without cleaning liquid. Before starting up, you must pour the cleaning liquid into the cleaning tank in accordance with the requirements of the manual. 4. The cleaning solution must not have the characteristics of strong acid or alkali, and if safe measures are not taken, flammable solutions cannot be used. 5. During the cleaning process, you must wear insulated gloves, and do not put your fingers in the cleaning liquid; the items to be cleaned should not be in contact with the bottom of the tank, but they should be bent and soaked in the cleaning liquid, so that the workpiece can be removed. Put it into a dedicated cleaning box. 6. Pay attention to the continuous working time of the plasma cleaning machine, do not exceed eight hours, because the temperature of the cleaning fluid will also rise with the extension of the working time. 7. If the plasma cleaning machine has a heating device, after cleaning, the heater must be closed first, and the cleaning liquid will be vented after cooling. When using the plasma cleaning machine, it can be carried out in accordance with the requirements of the rules, and safety measures should be taken. If there is water leakage in the cleaning tank or other failures, the machine should be shut down immediately and the cleaning liquid should be poured out. , It can be repaired; if it is not used for a long time, the cleaning fluid should also be discharged.

Smartplasma plasma cleaning machine procedures are all different, the safe operation procedures of plasma cleaning machine No. 3 are as follows:  1. There should be enough space for heat dissipation on the back of the generator.  2. Ensure that the machine is well grounded to avoid personal injury accidents.  3. Insulation gloves must be worn during the cleaning process. Do not immerse your fingers in the cleaning solution.  4. After the operation is completed, cut off the power supply, clean up the dirt on the equipment, and ensure the cleanliness of the machine.  5. The cleaning liquid must not be strong acid or strong alkaline, and flammable solutions cannot be used without reliable safety measures.  6. It is strictly forbidden to start the machine under no-load condition or without cleaning fluid in the tank. Before starting the machine, pour the cleaning liquid into the cleaning tank according to the liquid level in the instruction manual.  7. The object to be cleaned must not be in contact with the bottom of the tank. It is recommended to put the workpiece in the cleaning basket, and the workpiece should be completely immersed in the cleaning liquid.  8. The temperature of the cleaning fluid will increase with the continuous working time. The continuous working time of the plasma cleaner should not exceed 8 hours.  9. If water leakage or other failures are found in the cleaning tank, it should be shut down immediately, and the cleaning fluid should be emptied and repaired by maintenance personnel.  10. After cleaning the plasma cleaning machine with heating device, the heater must be turned off and the cleaning liquid must be cooled before emptying the cleaning liquid.  11. When not in use for a long time, the lotion should be discharged, and the inner tank and surface should be dried and protected with a film. The machine should be stored in a dry place.  12. Plasma cleaners should be used in a clean, dry, and non-corrosive environment, and avoid violent vibrations.